Product Catalogue

Single Phase Electricity Meter
(Single Phase Watt-hour Meter, Single Phase KWH Meter, Single Phase Energy Meter, Single Phase DIN-rail Meter)

DDS238-2 SW
DDS238-2 SW Single Phase Electricity Meter

This product has been discontinued and removed from our shelves.

The DDS238-2 SW single phase electricity meter is designed to measure single phase two-wire AC active energy and variable parameter. All of its functions meet the technical requirement for class 1 single phase watt hour meter by the standard of IEC61036. The durable meter is high in stability and overload capability, low in power loss and small in volume.

Basic Function
1. The single phase electricity meter can measure bi-directional total active energy, as well as the reverse active energy in the total active energy.
2. Its LCD display is available with backlighting.
3. The meter displays realtime voltage, current, power, frequency and power factor.
4. Pulse LED indicator is available to indicate the operation status of meter, and pulse output comes with optical coupling isolation.
5. The product adopts 35mm DIN-rail installation

Optional Function
1. The meter can measure and display the total forward/reverse active energy.
2. Energy-reset function: Under energy-reset mode, the display of total energy display won't be affected.

Technical Data
Rated voltage110V, 120V, 220V, 230V, 240V
Working voltage range0.8~1.2Un
Rated current5(65)A, 5(30)A, 10(40)A, 5(60)A or other as required
Rated Frequency50Hz or 60Hz
Connection modeDirect type
DisplayLCD
Accuracy class Class 1
Power consumption<2W/10VA
Start current0.004Ib
Constant 800~3200 IMP/KWh
Pulse output Passive pulse, pulse width is 80+5 ms
Executive standard IEC62053-21, DL/T645-2007 or MODBUS-RTU
Working temperature-30℃~70℃
Outline dimension LXMXH90×35×60mm
Weight Approx 0.13kg

Wire connection

Outline dimension

Related products
    1. DDS238-2 ZN Single Phase Electricity Meter Pulse LED indicators are installed to indicate the device working status. The pulse output is available with optical coupling isolation.
      Event log is available.
      The single phase electricity meter adopts 35mm DIN-rail installation method.